Ideal for CPR carts, hospitals, schools, offices, fitness centers, and public access AED programs, the M5070A battery installs quickly and activates an automatic self-test to confirm proper operation. A flashing green status indicator verifies that your AED is ready for rescue.

Replacing your AED battery before expiration is critical for compliance and emergency preparedness. This genuine Philips battery ensures consistent performance when seconds matter most.

Battery Specifications

• Battery Type: Lithium (Non-Rechargeable)
• Battery Life: Up to 4 years (standby mode)
• Shock Capacity: 200+ shocks
• Part Number: M5070A
• Alternate Part Number: 989803121381
• Designed for long-term CPR cart and AED readiness

Compatible Philips HeartStart AEDs

• Philips HeartStart FRx AED – Part #861304-C01
• Philips HeartStart OnSite AED – Part #M5066A-C02

How to Replace the Philips HeartStart AED Battery

1. Lay the AED face down
2. Locate and lift the battery release tab
3. Remove the old battery from the compartment
4. Insert the new battery until it clicks into place

Once installed, the AED will automatically run a self-test. Confirm the flashing green status indicator to ensure the device is rescue-ready.

Each battery is rigorously tested by Cardiac Science and then continuously monitored once installed in the AED. Using patented Rescue Ready® technology and embedded circuitry, the battery communicates critical status information—such as battery condition, age, storage temperature, and readiness—directly to the Powerheart G5. The AED performs daily self-checks to confirm the battery is present and functioning properly.

Built for long-term reliability, the IntelliSense battery delivers years of unmatched performance and is backed by a 4-year full performance guarantee. Ideal for workplaces, schools, healthcare facilities, first responders, and public access AED programs, this battery ensures your Powerheart G5 is always prepared when every second counts.

Key Features & Benefits

• Designed exclusively for Cardiac Science Powerheart G5 AED
• Single battery powers the entire AED
• Medical-grade, high-reliability construction
• Rescue Ready® technology with daily self-testing
• Communicates battery health, age, and status to the AED
• Automatically monitored while installed
• 4-year performance guarantee

Designed for easy replacement, the batteries install directly into the AED battery bank and support ZOLL’s built-in battery monitoring system. After installation, a simple battery reset restores the usage indicator to full charge, confirming your AED is ready for emergency response.

Ideal for workplaces, schools, healthcare facilities, gyms, and public access AED programs, these replacement batteries are essential for maintaining uninterrupted AED readiness and meeting emergency preparedness standards.

Key Features & Benefits

• Designed for ZOLL AED Plus defibrillators
• Type 123 Duracell lithium batteries
• Supplied as a pack of 10
• Long-lasting, reliable lithium power
• Supports AED battery monitoring system
• Easy to install and replace

Battery Installation Instructions

1. Remove all existing batteries from the AED at once
2. Insert new batteries into the battery compartment
3. Follow polarity markings and ensure batteries are fully seated
4. When prompted, press the battery reset button inside the compartment
5. Battery usage indicator will reset to full charge

Refer to the AED operating instructions for complete details.

Featuring smart battery technology, the AED 3 battery continuously monitors and reports its power status directly to the AED. For WiFi-enabled ZOLL AED 3 devices, battery condition data can also be transmitted wirelessly to AED program management systems—supporting proactive maintenance and compliance.

This single-use battery pack is ideal for maintaining uninterrupted AED performance in workplaces, schools, healthcare facilities, gyms, first responder units, and public access AED programs, reducing maintenance frequency while delivering dependable emergency power.

Key Features & Benefits

• Designed exclusively for ZOLL AED 3
• Disposable lithium manganese dioxide battery
• Up to 5-year standby life when installed
• Smart battery technology monitors power status
• Reports battery condition to the AED
• Wireless status reporting for WiFi-enabled AED 3 models
• Supports AED readiness and program compliance
• Easy to install and replace

With approximately 800 minutes of “on” time or up to 166 discharges at 200 joules, the CR2 battery delivers consistent performance in emergency situations. Each battery is supplied with replacement instructions, making installation quick and straightforward for any AED program.

Once installed, simply verify readiness by confirming the Rescue Indicator flashes green, signaling that the AED is operational and prepared for use. This replacement battery is ideal for maintaining readiness across workplaces, schools, healthcare facilities, fitness centers, and public access AED programs.

Key Features & Benefits

• Designed for Physio-Control LIFEPAK CR2 AED
• Lithium, non-rechargeable battery
• 4-year lifespan
• Approximately 800 minutes of on-time
• Supports up to 166 shocks at 200 joules
• Easy installation with included instructions
• Helps reduce maintenance and replacement costs
• Reliable power for emergency readiness

Battery Specifications

• Battery Type: Lithium
• Rechargeable: No
• Part Number: 11141-000165
• Lifespan: 4 years
• Included: 1 battery + replacement instructions

How to Replace the LIFEPAK CR2 Battery

1. Place the AED face down
2. Locate and remove the existing battery
3. Insert the new CR2 lithium battery until it clicks into place
4. Confirm the Rescue Indicator flashes green on the front of the AED

Compatibility

Compatible with the following Physio-Control LIFEPAK CR2 AED models and packages:

• LIFEPAK CR2 AED – Part # 99512-001262
• Small Business Value Package – BVP-CR2-B
• School & Community Value Package – SVP-CR2-B
• Corporate Value Package – CVP-CR2-B
• Complete Value Package – ZVP-CR2-B
• Church/Worship Value Package – WVP-CR2S

This battery replacement kit includes a battery discharger and detailed instructions for safe disposal, helping organizations comply with proper handling and environmental guidelines. The non-rechargeable design simplifies maintenance and ensures consistent power output throughout the battery’s service life.

Ideal for workplaces, healthcare facilities, first responder units, schools, fitness centers, and public access AED programs, this replacement battery supports uninterrupted AED readiness and reliable operation during sudden cardiac arrest emergencies.

Key Features & Benefits

• Designed specifically for LIFEPAK 1000 AED
• LiMnO₂ non-rechargeable lithium battery
• Reliable, long-lasting AED power source
• Includes battery discharger
• Includes safe disposal instructions
• Simplifies AED maintenance and replacement
• Helps maintain emergency preparedness

Compatibility

• Physio-Control LIFEPAK 1000 AED 

What’s Included

• 1 LIFEPAK 1000 lithium non-rechargeable battery
• Battery discharger
• Safe disposal instructions